Skip to main content

Installing and commissioning the driver

This page takes you from adding the driver to a test message on a phone.

Before you start

Have these ready. See What you need for the full list.

  • A licence key: a 30-day trial or a full key from the LCD Notifications product page.
  • The details of the email account the messages will go out from, and the customer's Pushover user keys if they use Pushover.

1. Add the driver​

In the Crestron Home configurator, add a device to the room where the inbox tile should appear. Search for notifications and choose Notifications V2 (Make: LightingControl, Category: Notifications, Developer: LCD).

Pick "Notifications V2"

The search can also list LCD's older Email Notifications and PushOver drivers. This page documents Notifications V2.

Give the device a name and press Continue.

2. Enter the licence key​

The setup wizard has one step, Licence. Paste the licence key into LICENCEKEY and press Finish. Use Licence Store if you need a key or a trial first. The step also carries two links you'll use next:

  • Notifications Setup opens the setup app.
  • Product & Licence App manages this processor's LCD products and licences.
Sign in to open the apps

The setup app and the Product & licence page ask for the processor's username and password. Use a processor administrator, or an account in the processor's LCD group. See Signing in to LCD apps.

Without a licence

An unlicensed driver keeps its settings and its inbox, but it sends nothing. Programming actions are logged and ignored, and other systems that send to it get a refusal that says why.

3. Set up email or Pushover​

Open Notifications Setup and go to Email and Pushover.

  1. Fill in the email account, or the Pushover application token, or both. The settings for each provider are on Email, Pushover, webhooks and ntfy.
  2. Press Save. Changes on every tab wait until you save them, and the driver checks them all together. If something is wrong, the Save bar lists what to fix and nothing is saved.
  3. Press Send a test email or the Pushover test. The result for each person appears on the page.

Saved passwords and keys show as Saved, and their values stay hidden. Type a new value to replace one.

4. Add the people​

Go to Who gets what and add each person who should get messages: a name, an email address, a Pushover user key, or both. For each person, choose:

  • Messages that name no one: from this level up. A message sent without naming anyone goes to everyone whose level it reaches. Leave it at info to receive everything.
  • Quiet hours, if they don't want to be woken. Anything below critical waits until the quiet hours end.

Save, then use the person's own test button to check they receive it.

5. Add templates​

Go to Templates and add one template for each thing the house should tell people about: "Garage open", "Water leak", "Guest at the gate". See Templates, people and the inbox.

Each template you save appears in Crestron Home programming as an action called Send followed by its name.

6. Use it in programming​

In Crestron Home programming, add the Send Garage open action wherever the house should send it, for example to an event that fires when the garage door has been open for ten minutes. See Programming.

7. Check the tile​

Open the room on a touch panel. The tile shows the unread count, and tapping it opens the inbox. Use Settings in the setup app to show the tile on the Home page, the room page, or both.